INSTALLATION
PREMIUM FLUSH FRONT INSTALLATION
1)Unplug the power source.
2)Remove the top louver (if fi tted) by carefully pulling it out.
3)Install the premium fl ush front top louver in place by sliding the louver tabs into the louver brackets on the inside top of the fi rebox.
6)Remove the manual control switch bracket by undoing the 2 screws.
Louver Tab
7)Remove the burner ON/OFF switch from the bracket using a pair of pliers and remove the 2 screws that secure the 2 wires on the valve.
Burner ON/OFF
Switch
Premium Flush Front Top Louver in place.
4)Open the bottom louver.
5)Remove the bottom louver (if fi tted) by undoing the 2 screws which secure the louver to the hinges on the left and right side.
Valve
8)Install the new ON/OFF switch to the manual control switch bracket.
24 | Regency® |
