Settings You Can Change with User Tools

❖Auto Image Density Priority

You can set whether Auto Image Density is “On” or “Off” when the machine is turned on, reset, or modes are cleared.

Note

❒Default: Full Colour/Two-col-

our: Off, B&W/Single Colour: On

❒When using the Auto Colour Select function, the settings of Full Colour/Two-colour will be effective.

Reproduction Ratio P.1/2

❖Shortcut R / E

You can register up to three fre- quently used Reduce/Enlarge ra- tios other than the fi xed Reduce/Enlarge ratio and have them shown on the initial display. You can also change registered Re- duce/Enlarge ratios.

If no Reduce/Enlarge ratio has been set when selecting [Shortcut R

/E 1], [Shortcut R / E 2], or [Shortcut R

/E 3], enter the ratio using the number keys.

❖Enlarge 1-5

You can customize available en- largement ratios by pressing [Re- du ce / Enlar ge] , followed by [Enlarge].

Note

❒Default:

•Metric version:

•Enlarge 1: 115%

•Enlarge 2: 122%

•Enlarge 3: 141%

•Enlarge 4: 200%

•Enlarge 5: 400%

•Inch version:

•Enlarge 1: 121%

•Enlarge 2: 129%

•Enlarge 3: 155%

•Enlarge 4: 200%

• Enlarge 5: 400%

5

 

❒When selecting [User Enlrg. Ra- tio], enter a ratio using the number keys (in the range of 101 to 400%).

❖Priority Setting: Enlarge

You can set the ratio with priority when [Reduce / Enlarge] is pressed, followed by [Enlarge].

Note

❒Default:

•Metric version: 141%

•Inch version: 155%

Reproduction Ratio P.2/2

❖Reduce 1-6

You can customize available re- duction ratios by pressing [Reduce / Enlarge], followed by [Reduce].

111