Ricoh 3224C/3232C key, key, key, [OK], [OK], Note, [OK], Start, [Yes], [Recall], Press the, Press the, Press the, Clear Modes, H Press [OK], D Press [OK], E Press [OK]

Colour Balance

Changing the registered settings

A Press the {Adjust/Program Colour}

key.

B Make sure that [Colour Balance] is selected, and then press [Program Colour Balance].

C Select the program number (1–3) whose settings you want to change.

The registered colour balance is displayed.

D Change the registered settings.E After the registered settings are changed, press [Program Colour Balance ].F Press [Program], and then select the program number to be over- written.G Press [Register].

The settings are changed.

H Press [OK].

Copying with the registered settings

A Press the {Adjust/Program Colour}

key.

B Make sure that [Colour Balance] is selected, and then press [Program Colour Balance].

C Make sure that [Recall] has been selected, and then select the program that you want to use.

D Press [OK].

E Place the originals, and then press the {Start} key.

Note

❒The adjusted settings will be de- leted and the initial values will be reset when either Auto Clear has been performed, when the

{Clear Modes} key has been pressed or when the power has 3 been turned off.

Deleting the registered settings

A Press the {Adjust/Program Colour}

key.

B Make sure that [Colour Balance] has been selected, and then press [Program Colour Balance].

C Press [Delete], and then select the program that you want to delete.

D Press [Yes].

E Press [OK].

85