Ricoh 3224C/3232C Note, Note, Note, [Exit], [Program], Important, Important, [Horiz.mm], [Horiz.mm], EPress [OK], CPress [OK], Clear Modes, APress the {#} key

Copying

D Enter the horizontal size of the paper using the number keys, and then press [#].

	Note
	❒ If [Horiz.mm] is not highlight-
	ed, press [Horiz.mm].
	❒ To register the custom size
2
	entered, press [Program], and

then press [Exit].

EPress [OK].When copying onto special paperAPress the {#} key.BSelect paper type in "Special paper".CPress [OK].D Place the originals, and then press the {Start} key.

Note

❒When the Sort function is set, press the {#} key after all origi- nals have been scanned.

E When your copy job is finished, press the {Clear Modes} key to clear the settings.

When copying onto OHP Transparencies or Thick Paper

To make copies onto OHP transparencies or thick paper, you need to specify the paper type and size. See p.23 “When copying onto standard size paper”, p.23 “When copying onto custom size paper”.

Important

❒Use only recommended OHP trans- parencies.

Note

❒The print speed when copying onto OHP transparencies or thick paper is slower than when copying onto plain paper.

A Open the bypass tray, and then adjust the guides to the paper size.

B Gently insert the OHP transparencies or thick paper face down until the beeper sounds.

Important

❒When copying onto OHP trans- parencies, make sure that the cut positions are set properly.

❒To avoid paper misfeeds, fan the paper before loading it in the tray.

C Press the {#} key.D Select [OHP Sheet] or [Thick Paper].

24 E Select the paper size.