Ricoh 3224C/3232C Note, Note, Important, DPress [OK] twice, A Press the {#} key, A Press the {#} key, BPress [Select Size], BPress [Custom Size], C Select the paper size

Copying from the Bypass Tray

B Insert the paper with the side you want to copy facing down until you hear the beep, and align the paper guide to the paper size.

ZGHS005e

1: Extender

Important

❒If the guides are not flush against the copy paper, image skewing or misfeeds might oc- cur.

Note

❒Do not stack paper over the lim- it mark, if you do image skew- ing or misfeeds might occur.

❒When you load the OHP trans- parencies, check the front and back of the sheets, and place them correctly, or a misfeed might occur. Set the paper di-

rection to K and select A4K, 81/2" ⋅ 11"K as paper size in step C.

❒Swing out the extender to sup-

port paper sizes larger than A4L, 81/2" ⋅ 11"L.

❒Fan paper to get air between the sheets and avoid multi-sheet feeds.

❒When copying onto envelopes: ⇒ p.26 “When copying onto en- velopes”.

C Select the paper type and size.

Note

❒When copying onto OHP trans- parencies or thick paper, see p.24 “When copying onto OHP Transparencies or Thick Paper”.

❒ When copying on the back side 2

of paper, see p.25 “When Copying on the Back Side of the Paper ”.

When copying onto standard size paperA Press the {#} key.BPress [Select Size].C Select the paper size.DPress [OK] twice.When copying onto custom size paper

A Press the {#} key.

BPress [Custom Size].

CEnter the vertical size of the pa- per using the number keys, and then press [#].

23