Ricoh 3224C/3232C Convert Colours, Note, Note, [OK], Note, [User, Press, Press, Colour], Two-colour, APress [OK], Full Colour, [Two-colour], [Red & Black], [Black Portion]

Colour Functions

When the {Single Colour} key is selected

A Select designation method of colour ( [Basic Colour], [User Colour] ).

B Select the colour, and then press [OK].

Note

❒When copied using the regis- tered colour, the original will be copied lighter than the regis- tered colour.

❒Press [iLighter] or [Darkerj], and you can adjust the density in 4 steps.

When [Two-colour]is pressedAPress [Change Colour Setting].BPress [Black Portion], and then select the colour to be replaced by black.

Note	2
❒ When selecting a colour from
the user colours, press [User
Colour].

C Press [Non-black Portion], and then select the colour to replace the black colour of the original.

DPress [OK] twice.

When the {Two-colour}key is selectedA Select either [Two-colour] or [Red & Black].When [Red & Black] is pressedAPress [OK].

Convert Colours

Copies by changing the colour in the original to a different colour.

Note

❒It is possible to specify up to 4 col- ours.

❒The width of the colour to be con- verted can be adjusted in 5 levels. If the colour width is set to “Wid- er” and red has been specified, col- ours which are close to magenta or orange, will also be converted. The colour width can be adjusted in the “User Tools”. See p.120 “Colour Sensitivity”

A Press the {Full Colour} key.

29