Ricoh 3224C/3232C Colour Balance, Colour Balance Program, key, Key, Note, [OK], Note, Note, Note, [OK], Lighter], Reference, Press the, [Darkerj], Press the, Reference

Colour Adjustment/Program

Colour Balance

3

84

You can adjust the overall colour tone when the overall copy is reddish or bluish.

Reference

For types and examples of the image adjustment functions, see p.iii “What You Can Do with This Machine <Colour Functions/Colour Adjustments>”.

A Press the {Adjust/Program Colour}

key.

ZFNS014E

B Make sure that [Colour Balance] is selected.C Adjust by pressing [iLighter] or[Darkerj].

Note

❒You can also register the adjust- ed settings. See p.84 “Colour Balance Program”.

D Press [OK].

Note

❒The indicator of the {Adjust/Pro- gram Colour} key will light up when adjusting the colour bal- ance.

❒The adjusted settings will be de- leted and the initial values will be reset when either Auto Clear has been performed, when the

{Clear Modes} key has been pressed or when the power has been turned off.

Colour Balance Program

You can also store the colour balance setting in memory and recall it when you want to use it.

Note

❒You can store up to 3 programs.

❒To change the registered settings, register them again. Previously reg- istered settings will be overwritten.

Storing the adjusted colour balance

A Press the {Adjust/Program Colour}

Key.

Reference

See p.84 “Colour Balance”.

B Press [Program Colour Balance]. C Press [Program].D Select a number (1–3) for this set- ting.

The colour balance setting will be registered in the selected number.

Note

❒If you select the program number key where the m is displayed, the previously registered set- tings will be overwritten. See p.85 “Changing the registered settings”.

E Press [OK].