Placing Originals

Placing Originals in the ADF

Settings should be made accordingly in the following situations:

❖When placing originals consisting of more than 50 pages:

p.15 “Batch”

❖When placing originals one by one: p.16 “SADF”

❖When placing originals of the same width but different sizes:

p.16 “Placing originals of mixed sizes”

A Set the document guide to the original size.B Place the aligned originals face
up into the ADF.

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZGHS060E

❖When placing custom size originals: p.17 “Placing custom size origi- nals”

Note

❒Do not stack originals above the limit mark on the side guide of the ADF.

❒The last page should be on the bot- tom.

❒Do not place objects on the sensors or cover them with your hands, or the original size may not be detect- ed properly. Also, do not place an- ything on the exposure glass cover as this could cause a malfunction.

1.Limit mark2.Document guide

Note

❒Straighten any curls in the orig- inals before placing them in the ADF.

❒To prevent multiple sheets from being fed at once, fan the origi- nals before placing them in the ADF.

❒Place the originals squarely.

Batch

The Batch mode enables you to copy originals of more than 50 pages as a single document, even if you place the originals into the ADF in instal- ments.

Important

❒Place special originals, such as translucent paper, one by one.

Zewh210E

1.Sensors

15