Ricoh 3224C/3232C Erase Colour, Note, Note, Note, [User Colour], APress [User Colour], I Press [OK] 3 times, C Press [Erase Colour], D Press [Convert Colour]

Copying

B Press [Edit / Colour Creation].

2

C Press [Colour Creation].D Press [Convert Colour].

E Select any one item from [Conversion 1] to [Conversion 4].

F Select the colour to be converted.G Select the new colour to be con- verted.

Note

❒You can adjust the density of each colour in 4 levels.

❒When you want to change the converted colour, press from

[Conversion 1] to [Conversion 4] and make the selection again.

❒When changing between more than two colours, repeat steps E to G.

Selecting from [User Colour]APress [User Colour].BSelect from the registered col- ours, then press [OK].

H After selecting all the colours to be converted, press [OK].I Press [OK] 3 times.J Place the originals, and then press the {Start} key.

Erase Colour

You can erase a certain colour in the image of the original.

Note

❒It is possible to select up to 4 col- ours.

❒The width of the colour to be delet- ed can be adjusted in 5 levels. If the colour width is set to “Wider” and red has been specified, colours which are close to magenta or or- ange, will also be deleted. The col- our width can be adjusted in the “User Tools”. See p.120 “Colour Sensitivity”

A Press [Edit / Colour Creation].B Press [Colour Creation].C Press [Erase Colour].D Select the colour to be erased.

Note

❒You can cancel the selection by pressing the selected (highlight- ed) key.

❒You can erase 4 colours at once.

30