Ricoh 3224C/3232C Covers, key, key, Press, Press, Press, the {#} key, G Press [OK] 3 times, F Press [OK] 3 times, If you selected (1-1, 1-2,…), the number keys, and then press

Copier Functions

E Press [Total Pages], enter the total number of original pages using the number keys, and then press the {#} key.

F When page designation is com- plete, press [OK].

Note

❒To change the settings after pressing [OK], press [Change], and then enter the numbers again.

G Press [OK] 3 times.If you selected (1-1, 1-2,…)A Press [Change] on the right hand side.

B Press [First Printing Page], and then enter the original page number from which to start printing using number keys, and then press the {#} key.

Note

❒To change the number entered, press [Clear] or the {Clear/Stop} key, and then enter a new number.

C Press [First Chapter No.], enter the chapter number from which to start numbering using the number keys, and then press the {#} key.

Note

❒You can enter between 1 and 9999 for the chapter number from which to start numbering.

D Press [Numbering from / to], and then enter the page number from which to start numbering using 2 the number keys, and then press

the {#} key.

E When page designation is com- plete, press [OK].

F Press [OK] 3 times.

Covers

You can use this function to create cover sheets by adding additional pages of different paper, or copying existing pages onto different paper.

Preparation

Before selecting this function, set the tray for front cover sheets. See “Cover Sheet Tray” in “Tray Paper Settings”, General Settings Guide.

Note

❒The cover sheet should be the same size and orientation as the copy pa- per.

❒You cannot use the bypass tray with this function.

❒When selecting Copy, select wheth- er the front and back covers are copied one-sided or two-sided. See “Cover Sheet Tray” in “Tray Paper Settings”, General Settings Guide.

75