![](/images/new-backgrounds/1206338/206338219x1.webp)
5. System Maintenance Reference
Firmware Updating
•Never turn the machine's main power off while the firmware is being updated, as this could damage the ECB or controller board.
Checking the Machine Firmware Version
To update the firmware for this machine, you need the most recent version of the firmware (firmware file downloadable from the Internet).
1.Turn the machine's main power on.
2.Press "User/Tool" Key and select "Reports Print" with the "Up" or "Down" key.
5 | 3. Press "OK" and select "Maintenance Page" with the "Up" or "Down" key. |
4.Press "OK" to print the "Maintenance Page", which shows the "Firmware Version (Controller)" and "Engine FW version".
Updating the Controller Firmware
Using the following procedure to update the controller firmware, be sure to print the configuration page both before and after the update. Comparing pre- and
Follow the procedure carefully, and note that it will vary in parts depending on which version of the firmware is currently installed.
Procedure
When updating firmware, always disconnect any other cable(s) than the one being used for the update operation.
(When updating firmware via USB cable, first disconnect any network and phone line cables, and when updating firmware via LAN cable, first disconnect any USB and phone line cables.)
1.Prepare:
•Computer
•USB cable or LAN (Local Area Network) cable
2.Download the firmware files to your computer.
108