Ricoh 406460 service manual Service Program Mode

Service Program Mode

Engine Maintenance

Registration

Registration

Horiz. Tray1

Vert. Tray1 Plain Paper

Vert. Tray1 Thick Paper

Vert. Tray1 Thin Paper

Horiz. Tray2

Vert. Tray2 Plain Paper

Vert. Tray2 Thin Paper

Vert. Tray2 Thick Paper

Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the vertical registration of plain paper for tray1. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the vertical registration of thick paper for tray 1. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the vertical registration of thin paper for tray 1. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the horizontal registration for tray 1. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the vertical registration of plain paper for tray 2. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the vertical registration of thin paper for tray 2. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

Adjusts the vertical registration of thick paper for tray 2. If the machine settings are reset to the factory defaults, this value does not change.

[-40 to 40 / 0 (Default) / 0.1 mm/step]

5

89