5. System Maintenance Reference
Fax Maintenance
5
TX Settings
Overseas Comm Mode Settings
Dial Pulse Setting
Redial Interval
Redialings
Overseas Comm Mode
Minimum Time Length
Dial Pulse Type
Sets the redial interval when Tx fails. [5 Min/ 6 Min]
Sets the number of redials when Tx fails. [2 times/ 3 Times/ 4 Times/ 5 Times]
This sets the machine to ignore a DIS signal sent from the called station once in a sending operation.
[Off (Default)/ Ignore DIS Once]
If this setting is set to "On", the machine detects the CNG signal after the line is connected. If it is set to "Off", the machine detects the CNG signal as long as the line is connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
This sets the number of pulses that are generated during dialing.
•N: Dialing '0' generates 10 pulses
•N+1: Dialing '0' generates 1 pulses
•
100
