Copier/Document Server Features

Edit

This section describes the user tools in the Edit menu under Copier/Document Server Features.

Default settings are shown in bold type.

Enter the width of the binding margin with the number keys as follows:

•Metric version: 0–30 mm (in increments of 1 mm)

•Inch version: 0"-1.2" (in increments of 0.1 inch)

3

Enter the width of the erased margin with the number keys as follows:

 

•Metric version: 2–99 mm (in increments of 1 mm)

•Inch version: 0.1"-3.9" (in increments of 0.1 inch)

An image of approximately 1.5 mm (0.06”) will not be displayed as the width of the separation line, when specifying solid or broken lines.

❖Front Margin: Left / Right

You can specify left and right margins on the front side of copies in Margin Adjustment mode.

The default setting is Left, 5 mm (Metric version) / Left, 0.2" (Inch version).

❖Back Margin: Left / Right

You can specify left and right margins on the back side of copies in Margin Adjustment mode.

The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver- sion).

❖Front Margin: Top / Bottom

You can specify top and bottom margins on the front side of copies in Margin Adjustment mode.

The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).

❖Back Margin: Top / Bottom

You can specify top and bottom margins on the back side of copies in Margin Adjustment mode.

The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).

❖1 Sided→2 Sided Auto Margin: TtoT

In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side.

The margin is set to the same value of “Back Margin: Left / Right”.

The default setting is Right, 5 mm (Metric version) / Right, 0.2" (Inch ver- sion).

❖1 Sided→2 Sided Auto Margin: TtoB

In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side.

The value set for “Back Margin: Top / Bottom” is used.

92The default setting is T / B: 0 mm (Metric version) / T / B: 0.0" (Inch version).