Ricoh [Vertical], [Auto Detect], [Custom Size], [Custom Size], [Standard Size], [Standard Size], [Bypass Tray Paper Size], Select the size you want to program

Special Senders to Treat Differently

G Press [On] or [Off], and then press [OK].

The illustration shows the “Authorized RX” display as an example.

H

I

J K

To program Bypass Tray Paper Size, press [Bypass Tray Paper Size].
	4
You can select a size from [Auto Detect], [Standard Size], or [Custom Size].

If you select [Auto Detect], proceed to steps I and N.

If you select [Standard Size], proceed to steps I, J and N.

If you select [Custom Size], proceed to steps I and K to N.

Select the size you want to program.

If you select [Standard Size], select a paper size displayed, and then proceed to step N.

If you select [Custom Size], proceed to step K.

Select the size you want to program from the sizes shown.Make sure that [Vertical] is selected.

165