Ricoh [Box, Name], [Clear], Clear/Stop, [Not Programmed], Enter a SUB Code, Press [Transfer Box], Select the box to program, Enter a Box name, and then press [OK]

Box Settings

E

Select the box to program.

When programming a new box, press [Not Programmed].

To change a box already programmed, press it, and then proceed to step H.

F

Press [Transfer Box].

4

G H

Enter a Box name, and then press [OK].Enter a SUB Code.

To change the SUB Code, press [Clear] again. To change Box name, press [Box

or the {Clear/Stop} key, and then try Name], and then repeat from step G.

I To Program End Receivers, Select an Receiving Station.

You can store five Receiving Station.

177