Scan Settings

Scan Settings

This section describes the user tools in the Scan Settings menu under Scanner Features.

Default settings are shown in bold type.

❖Wait Time for Next Orig.: Exposure Glass

When dividing originals and scanning them individually with the exposure glass to form a single file, select [Continuous Wait], [Off], or [Set Wait Time] for the waiting status.

The default setting is Set Wait Time, 60 second(s).

If you select [SADF] in [Original Feed Type] on the Scan to Folder screen, the [Wait Time for Next Orig.: Exposure Glass] setting becomes invalid.

If you select [Batch] in [Original Feed Type] on the Scan to Folder screen, the

[Wait Time for Next Orig.: Exposure Glass] setting becomes invalid, and the ma- chine waits for an additional original to be put in place.

If [Set Wait Time] is selected, enter the wait time in seconds (3-999) for placing

additional originals with the number keys. Scanning will start if additional originals are placed and the {Start} key is pressed within this time. You can

end scanning and begin transmission by pressing the {#}key within this time.

Once the specified time has elapsed, transmission starts automatically. 6 If [Continuous Wait] is selected, the machine will wait for additional originals

until the {#}key is pressed. Scanning will start when additional originals are placed and the {Start} key is pressed. You can end scanning and begin sending by pressing the {#} key.

If originals are placed in the auto document feeder (ADF), transmission will start without waiting for additional originals after all originals in the ADF have been scanned, regardless of the specified settings.

If a paper misfeed occurs or any of the following operations is performed while the machine is waiting for additional originals, the countdown stops and does not start again until the {#} key is pressed.

•Changing the settings such as the scan settings

•Opening the upper cover of the ADF

•Pressing the {Interrupt} key to activate the copy mode

197