Roland AR-200 Messages received for detecting trouble in Midi connection, Exclusive Communication

MIDI Implementation

*Not received when recording mode is not “Standby”.

*The same processing will be carried out as when Start is received.

●Stop

status

FCH

*Not received when recording mode is not “record”.

3.4Messages received for detecting trouble in MIDI connection.

■System Realtime message

●Active Sensing

Status

FEH

*When Active Sensing is received, the unit will begin monitoring the intervals of all further messages. While monitoring, if the interval between messages exceeds 400 ms, the same processing will be carried out as when All Sounds Off, All Notes Off and Reset All Controllers are received, and message interval monitoring will be halted.

4. Transmit data (MIDI Recorder Section)

When AR-200/3000 is in MIDI Recorder mode, MIDI Messages is not transmitted.

5. Exclusive Communication

Exclusive message model IDs that can be used on the AR-200 and AR-3000 are OOH, 38H (AR-200), 00H, and 37H (AR-3000). The Device Id can be set to 00H to 1FH.

Only received when AR-200/3000 is in Media Player Section.

●Data Set 1 DT1 (12H)

Byte	Description
F0H	Status of System Exclusive Message
41H	Universal System Exclusive Message Real time Header
dev	device ID (dev : 00H--1FH)
mdl	Model ID (mdl : 00H, 38H) AR-200
	(mdl : 00H, 37H) AR-3000
12H	Command ID (DT1)
aaH	address MSB
:	:
ddH	Address LSB
eeH	Data
:	:
llH	Data
sum	Check Sum
F7H	EOX (End of System Exclusive Message)

5.1 Parameter Address Map

This map indicates address,size, data (range), Parameter, Description,and default Value of parameters which can be transferred using "Data Set1(DT1)."

All the numbers of address, size, Data, and default Value are indicated in 7-bit Hexadecimal-form.

(AR-200 Model ID=00H,38H)

(AR-3000 Model ID=00H,37H)

■Address Block Map

An outlined address map of the Exclusive Communication is as follows;

❍ Exclusive Address Table	for recording setting		(Only AR-3000)
Address(H) SIZE(H)	DATA(H)	Parameter	Description

===================================================================

00 00 10	00 00 08	00	- 07	Phrase Number	upper 4bits
11#		00	- 7f	Phrase Number	lower 7bits
12#		00	- 04	Grade	0:ANNOUNCE
					1:LONG2
					2:LONG1
					3:STANDARD
					4:HIGH
					5:S-HIGH
					6:NASTER
13#		00	- 02	R-DAC mode	0:Linear
					1:Mode1
					2:Mode2
					3:Mode3
					4:H-LINEAR
14#		00	- 01	REC type	0:MONO
					1:STEREO

15#	00 - 03	REC Trigger Level	0:OFF
			1:LOW
			2:MID
			3:HIGH
16#	00 - 02	REC Source	0:ANALOG-IN
			1:DIGITAL-IN
			2:MIDI-IN
17#	00 - 01	TimeBase	0:192
			1:240

===================================================================

Phrase number	DATA(H)
A0001-A1000	00 00	- 07 67
B0001-B1000	07 68	- 0H 4F

*Only received packet data.

*When reception of this packet is completed, the AR-3000 goes into REC PAUSE mode. However, if the phrase already exists, the AR-3000 ignores this SysEx message.

(AR-2000 compatible)
Address(H) SIZE(H)	DATA(H)	Parameter	Description

===================================================================

00 00 00	00 00 08	00	- 07	Phrase Number	upper 3bits
01#		00	- 7f	Phrase Number	lower 7bits
02#		00	- 04	Grade	0:ANNOUNCE
					1:LONG2
					2:LONG1
					3:STANDARD
					4:HIGH
03#		00	- 02	R-DAC mode	0:Linear
					1:Mode1
					2:Mode2
04#		00	- 01	REC type	0:MONO
					1:STEREO
05#		00	- 03	REC Trigger Level	0:OFF
					1:LOW
					2:MID
					3:HIGH
06#		00	- 01	REC Source	0:ANALOG-IN
				(MIDI REC OFF)
					1:MIDI-IN
				(MIDI REC ON)
07#		00	- 01	TimeBase	0:192
					1:240

===================================================================

Phrase number	DATA(H)
A0001 - A0500	00 00 - 03 73
B0001 - B0500	03 74 - 07 67

*Only received packet data.

*When reception of this packet is completed, the AR-3000 goes into REC PAUSE mode. However, if the phrase already exists, the AR-3000 ignores this SysEx message.

62