Roland AR-200 owner manual Midi Implementation, Midi Time Code, Midi Machine Control MMC

●MIDI Time Code

❍Full Messages

*Data is received when Sync Source is set to "MTC." When the Quarter Frame message is received, operation proceeds with the start of the song synchronized to "00h00m00s00f00" with the "MTC Offset" and the "Delay Time" added.

*This acts upon the currently selected audio phrase.

*MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.

Status	Data Bytes	Status
F0H	7FH, dev, 01H, 01H, 06H,	F7H
	01H, hrH, mnH, scH, frH

Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
01H	sub-ID#1 (MIDI Time Code)
01H	sub-ID#1 (Full Messages)
06H	number of bytes
01H	[TARGET] sub command
hrH	Hours Count	xyyzzzzz
		x Reserved (0)
		yy Time Code type
		0 = 24 Frames / Sec
		1 = 25 Frames / Sec
		2 = 30 Frames / Sec (Drop Frame)
		3 = 30 Frames / Sec (Non Drop Frame
		zzzzz Hours (0-23)
mnH	Minutes Count	xxyyyyyy
		xx Reserved (00)
		yyyyyy Minutes (0-59)
scH	Seconds Count	xxyyyyyy
		xx Reserved (00)
		yyyyyy Seconds (0-59)
frH	Frame Count	xxxyyyyy
		xxx Reserved (000)
		yyyyy Frame No.(0-29)
F7H	EOX (End of Exclusive)

●MIDI Machine Control (MMC)

*This is Received when the MMC mode is set to "SLAVE."

*This acts upon the currently selected phrase.

❍STOP (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 01H	F7H
Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
06H	MMC Command Message
01H	STOP (MCS)
F7H	EOX (End of Exclusive Message)

*Playback is stopped immediately when this command is received if the device ID matches, or if 7FH is received.

❍PLAY (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 02H	F7H
Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
06H	MMC Command Message
02H	PLAY (MCS)
F7H	EOX (End of Exclusive Message)

*Playback is started immediately when this command is received if the device ID matches, or if 7FH is received.

❍DEFERRED PLAY (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 03H	F7H
Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
06H	MMC Command Message
03H	DEFERRED PLAY (MCS)
F7H	EOX (End of Exclusive Message)

MIDI Implementation

*Playback is started immediately when this command is received if the device ID matches, or if 7FH is received.

❍RECORD STROBE (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 06H	F7H
Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
06H	MMC Command Message
06H	RECORD STROBE (MCS)
F7H	EOX (End of Exclusive Message)

*Recording of the phrase begins when this command is received if the device ID matches, or if 7FH is received.

*If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded with MMC).

❍RECORD EXIT (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 07H	F7H
Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
06H	MMC Command Message
06H	RECORD STROBE (MCS)
F7H	EOX (End of Exclusive Message)

*Recording is stopped immediately when this command is received if the device ID matches, or if 7FH is received.

*If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded with MMC).

❍LOCATE (MCP)

Format 2 - LOCATE [TARGET]
Status	Data Bytes	Status
F0H	7FH, dev, 06H, 44H, 06H,	F7H
	01H, hrH, mnH, scH, frH, ffH
Byte	Description
F0H	Status of Exclusive Message
7FH	Universal System Exclusive Message Realtime Header
dev	device ID (or 7FH)
06H	MMC Command Message
44H	LOCATE(MCP)
06H	Number of Bytes
01H	[TARGET] sub command
hrH	Standard time with Sub Frame
mnH
scH
frH
ffH
F7H	EOX (End of Exclusive Message)

*If the device ID matches, or if 7FH is received, then when this command is received, the location of the time code specified in the command data is located.

*MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.

Appendices

59