Roland AR-200 Transmitted message which are received, Transmitted message which are produced

MIDI Implementation

2. Transmitted data (Media Player Section)

2.1Transmitted messages while a phrase is being played back

The stored MIDI message are transmitted When the MIDI phrase will playback after OUT is

set in the MIDI OUT.

In this case, AR-200/3000 is not transmitted MIDI messages which are received.

2.2 Transmitted message which are received.

When THRU is set in the MIDI OUT, AR-200/3000 transmits message which are received.

2.3 Transmitted message which are produced.

When OUT is set in the MIDI OUT, AR-200/3000 transmits the following produced

messages.

■Channel Voice Message

● Note Off

Status	Second	Third
8nH	kkH	40H
n = MIDI Channel No.: 0H --		FH (ch.1--ch.16)
kk = Note No.: 00H--	7FH (0--	127)

*After the MIDI Phrase is stopped, AR-200/3000 produces Note off message for received notes remains on.

*When Note On is sent at the start of an audio performance, the same note number as that of the Note On is transmitted. For more information about sending notes, refer to the Note On section below.

●Note ON

Status	Second		Third
9nH	kkH		7FH
n = MIDI Channel No.: 0H--		FH (ch.1--	ch.16)
kk = Note No.: 00H--	7FH (0--	127)

*At the start of the audio phrase performance, the note number defined in the MIDI note map is sent.In this instance, if multiple note numbers are selected in the phrase, only the lowest note number is transmitted.

*There is no transmission when the Note Send setting is set to "OFF" (Note Send settings are available only with the AR-3000).

*Data is not output if the MIDI Receive channel setting is "OFF." When set to 1-16, data is transmitted only on the selected channel. When set to ALL, data is transmitted on Channel 1.

*There is no transmission during playback of MIDI phrases.

●Control Change

❍Hold1 OFF

Status	Second	Third
BnH	40H	00H
n = MIDI Channel No.: 0H--FH (ch.1--		ch.16)

**After the MIDI Phrase is stopped, AR-200/3000 produces Note off message for received notes remains on.

■Channel Mode Message

●All Note Off (Controller No. 1 2 3)

Status	Second	Third
BnH	7BH	00H
n = MIDI channel No.: 0H--FH (ch.1--		ch.16)

*Transmitted message while a phrase is being played back.

2.4 Recognized message for sync

■System Realtime Message

● Timing Clock

status

F8H

*Transmitted message while a phrase is being played back.

●Start

status

FAH

●Stop

status

FCH

■System Common Message

● Quarter Frame

*This is transmitted when Sync Out is set to "MTC." The time count transmitted is the time with the start of the song set to "00h00m00s00f00" with the "MTC Offset" and the "Delay Time" added.

*MIDI phrases and pattern phrases are not transmitted when Dual Mono mode is selected.

status	second
F1H	mmH (= 0nnndddd)

Regarding the Quarter Frame, please refer to "Receive data (Media Player Section) ~Quarter Frame~".

■System Exclusive Message

● MIDI Time Code

❍Full Message

*This is transmitted when Sync Out is set to "MTC" and the location of the phrase is moved. The time count transmitted is the time with the start of the song set to "00h00m00s00f00," and the "MTC Offset" and the "Delay Time" added.

*MIDI phrases and pattern phrases are not transmitted when Dual Mono mode is selected.

Status	Data Bytes	Status
F0H	7FH, dev, 01H, 01H	F7H
	hrH, mnH, scH, frH

Regarding the MIDI Time Code, please refer to "Receive data (Media Player Section) ~MIDI Time Code~".

●MIDI Machine Control (MMC)

*Data is transmitted when MMC mode is set to "MASTER."

❍ STOP (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 01H	F7H
Byte	Description
F0H	Status of System Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID
06H	MMC Command Message
01H	STOP (MCS)
F7H	EOX (End of System Exclusive Message)

*When "STOP" is pressed, a Device ID of 7FH is transmitted.

❍ DEFERRED PLAY (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 01H	F7H
Byte	Description
F0H	Status of System Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID (or 7FH)
06H	MMC Command Message
03H	DEFERRED PLAY (MCS)
F7H	EOX (End of System Exclusive Message)

*When "START" is pressed, a Device ID of 7FH is transmitted.

❍ RECORD STROBE (MCS)

Status	Data Bytes	Status
F0H 7FH, dev, 06H, 07H		F7H
Byte	Description
F0H Status of System Exclusive Message
7FH	Universal System Exclusive Message Real time Header
7FH	device ID (or 7FH)
06H	MMC Command Message
06H	RECORD STROBE (MCS)
F7H	EOX (End of System Exclusive Message)

*When recording of a phrase begins, a Device ID of 7FH is transmitted.

❍ RECORD EXIT (MCS)

Status	Data Bytes	Status
F0H	7FH, dev, 06H, 07H	F7H
Byte	Description
F0H	Status of System Exclusive Message
7FH	Universal System Exclusive Message Real time Header
dev	device ID
06H	MMC Command Message
07H	RECORD EXIT
F7H	EOX (End of System Exclusive Message)

*When recording of a phrase is stopped, a Device ID of 7FH is transmitted

60