Roland Fantom-Xa , 42: GATE, 44: LONG DELAY,

177
Adding Effects
42: GATE
Cuts the reverb’s delay according to the volume of the sound sent
into the effect. Use this when you want to create an artificial-
sounding decrease in the reverb’s decay.
fig.MFX-42
43: DELAY
This is a stereo delay.
When Feedback Mode is NORMAL:
fig.MFX-43a
When Feedback Mode is CROSS:
fig.MFX-43b
44: LONG DELAY
A delay that provides a long delay time.
fig.MFX-44
Parameter Value Explanation
Threshold # 0–127 Volume level at which the gate begins to
close
Mode GATE,
DUCK
Type of gate
GATE: The gate will close when the
volume of the original sound decreas-
es, cutting the original sound.
DUCK (Ducking): The gate will close
when the volume of the original
sound increases, cutting the original
sound.
Attack 0–127 Adjusts the time it takes for the gate to
fully open after being triggered.
Hold 0–127 Adjusts the time it takes for the gate to
start closing after the source sound falls
beneath the Threshold.
Release 0–127 Adjusts the time it takes the gate to fully
close after the hold time.
Balance # D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the effect sound (W)
Level 0–127 Output level
Parameter Value Explanation
Delay Left 0–1300 ms,
note
Adjusts the time until the delay sound is
heard.
Delay Right
Phase Left NORMAL,
INVERSE
Phase of the delay sound
Phase Right
L in
R in
L out
R out
Gate
Gate
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Feedback
Mode
NORMAL,
CROSS
Selects the way in which delay sound is
fed back into the effect. (See the figures
above.)above.)