44
Creating a Patch
[F2 (PITCH)]
Parameter marked with a “
” can be controlled using specified MIDI messages
(Matrix Control, p. 49)
[F3 (PCH ENV)]
Parameter marked with a “
” can be controlled using specified MIDI messages
(Matrix Control, p. 49)
Parameter Value Explanation
Tone Coarse Tune
-48– +48 Pitch of the tone’s sound (in semitones, +/-4 octaves)
Tone Fine Tune
-50– +50 Pitch of the tone’s sound (in 1-cent steps; one cent is 1/100th of a semitone)
Rand Pitch Depth 0–1200 Width of random pitch deviation that will occur each time a key is pressed (in 1-cent steps)
If you do not want the pitch to change randomly, set this to “0.”
Pitch Keyfollow -200– +200 Amount of pitch change that will occur when you play a key one octave higher
If you want the pitch to rise one octave as on a conventional keyboard, set this to “+100.” If you want
the pitch to rise two octaves, set this to “+200.”
P-Env V-Sens -63– +63 Keyboard playing dynamics can be used to control the depth of the pitch envelope.
If you want the pitch envelope to have more effect for strongly played notes, set this parameter to a
positive (+) value.
P-Env T1 V-Sens -63– +63 This allows keyboard dynamics to affect the T1 of the Pitch envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
P-Env T4 V-Sens -63– +63 Use this parameter when you want key release speed to affect the T4 value of the Pitch envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
P-Env Time KF
(Time Keyfollow)
-100– +100 Use this setting if you want the pitch envelope times (T2–T4) to be affected by the keyboard location.
Based on the pitch envelope times for the C4 key, positive (+) settings will cause notes higher than C4
to have increasingly shorter times.
Parameter Value Explanation
P-Env Depth -12– +12 Depth of the Pitch envelope
Higher settings will cause the pitch envelope to produce greater change. Negative (-) settings will in-
vert the shape of the envelope.
P-Env Time 1–4
0–127 Pitch envelope times (T1–T4)
Higher settings will result in a longer time until the next pitch is reached.
P-Env Level 0–4 -63– +63 Pitch envelope levels (L0–L4)
Specify how the pitch will change at each point, relative to the pitch set with Coarse Tune or Fine Tune.
C4C3C2C1 C5 C6 C7
0
+50
+100
+200
-50
-100-200 Key
Pitch Pitch Keyfollow
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time Time Keyfollow
T1 T2 T3 T4
L3
L4
L2
L1
L0
Note off
Pitch
Pitch Envelope
Time
Note on
Fantom-Xa_e.book 44ページ 2004年10月22日 金曜日 午後2時3分