![](/images/new-backgrounds/1303803/30380387x1.webp)
Appendix
Installing the USB MIDISport Interface
Because the Virtual
HARDWARE installation:
(On a PC: You must be running Windows 98 to properly use the MIDISport )
1)Attach the MIDISport to your USB port with the standard USB cable included with the MIDISport package.
2)A computer USB port is a small (1/8" x 3/8"), rectangular female connector, sometimes found in pairs.
3)Insert the male end of the USB cable into the USB port on the back of your computer.
4)Take the
5)Power up your computer so you can install the software drivers.
SOFTWARE Installation
1)For the hardware to communicate with the software, you need to install the "drivers." A software driver is a special, dedicated program that makes a MIDI interface accessible to a software application.
2)The complete instructions are included in a "Read Me" file included on the MIDISport
3)Double click on the filename to open it. It will guide you through the instructions to properly install your driv- er software.
4)For complete installation instructions, you may also go to the website: http://www.midiman.com/manuals/pdf/usb2x2man.pdf
CONNECTING the COMPUTER to the TEACHER KEYBOARD
1)Connect the MIDISport 2X2 to the computer via the USB port, using the cables provided
2)Connect the MIDI OUT of the teacher keyboard to the
3)Then connect
4)Another MIDI
5)Another MIDI
IMPORTANT NOTE: To use the MIDISport, the USB/MIDI Thru switch should be in the IN position, so the MIDISport will work as a MIDI interface
43