Roland MTLC-16 Installation, Set Up the Music Lab, Connect Cables, Software, Printed Materials

	Music Lab Installation Guide
MTLC-16 Lab Communication Console	(1)
MTLC-16 AC Adapter	(1)
MTLC-1 Student Communication Boxes	(16)
RJ-45 Telephone-Type Connectors	(16)
Headsets with built-in Microphone	(17)
1/4” to 1/4” stereo audio cable	(1)
9-Pin Din Serial Computer Connector	(1)
Software
Installation CD	(1)
including:
VMTLC-16 Virtual Music Tutor Lab Controller software
V-MT1 Visual Music Tutor software
VSC-88H Virtual Sound Canvas software
Printed Materials
MTLC-16 Music Tutor Lab Controller Owner’s Manual	(1)
V-MT1 Visual Music Tutor Owner’s Manual	(1)
VSC-88H Visual Sound Canvas Owner’s Manual	(1)
MTLC-16 QuickStart or “Survivor’s Guide”	(1)
Current Software Catalog	(1)

MTLC-16 Installation

Set Up the Music Lab

•Place the teacher’s instrument in the front and center of the lab.

•Place the Music Tutor Lab Controller(s) (MTLC-16), computer (if used), and external playback/recording devices (if used) on a table next to the teacher’s instrument.

•Place student instruments in rows facing the teacher’s instrument (row configuration is optional). Allow extra space behind each instrument for instructional purposes.

•Place audio monitor(s) (if used) to the side of the teacher’s instrument facing the student instruments.

•Place the visual monitor(s) (if used) on a podium or wall mount near the teacher’s station facing the student instruments.

•Connect all devices to an AC power strip as described in “Electrical Requirements” above.

Connect Cables

•Place one student communication box on each student instrument and insert the attached 1/4” plug into the head- phone jack of each student instrument as you proceed with the installation.

•Number the student communication boxes (MTLC-1) “1” – ”16.”

•Connect each student communication box to the corresponding numbered outputs on the MTLC-16 using the sup- plied RJ-45 cables.

•Connect the headphone jack on the teacher’s instrument to the “Teacher Instrument Left/Stereo” jack on the MTLC-16 using the supplied TRS (tip-ring-sleeve) cable.

9