Runco CX-47HD, CX-OPAL47, CX-65HD operation manual Main Menu, Source, Aspect Ratio

Operation

The Main Menu is the starting point for accessing all Crystal Series LCD functions.

(The ISF Calibration menu is not accessible until you enter a passcode.)

From the Main Menu, select Source to choose a video signal source.

The active source is indicated by an arrow (>) to its left; in this example, HDMI 1 is the active source.

Main Menu

Runco CX-65HD

Source

Aspect Ratio

Picture Adjust

Audio

Timer

Setup

ISF Calibration

Source

>HDMI 1 HDMI 2 HDMI 3 HDMI 4 Component 1 Component 2

RGB Video 1 Video 2

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table 4-1.

The currently-selected aspect ratio is indicated by an arrow (>) to its left; in this example, 16:9 is selected.

Note	The aspect ratio selection persists until you change it. (It is not
	saved independently for each input.)

Aspect Ratio

>16:9

4:3 Letterbox VirtualWide

CX-47HD/CX-OPAL47/CX-65HD Installation/Operation Manual 27