Runco XP-50DHD, XP-50DHDxa, XP-65DHD, XP-65DHDxa, XP-103DHD manual On / OFF, Cursor Keys, Video

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON / OFF

Press to turn the PlasmaWall on or off.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Keys (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menus are present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema DOWN Button = Cinema - VirtualWide - Letterbox - 4:3 - 16:9

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - HDMI 1 - HDMI 2

5.RETURN / EXIT

Press this button to exit the current menu and return to the previous one.

Note	Not all remote control units have this button. If yours does not, use
	the MENU button (see below) to exit the current menu.

6.LIGHT

Press to illuminate the buttons.

7.MENU

Press this button to show or hide the OSD controls.

8.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

9.COMP (Component) (2)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”

PlasmaWall XP Series Owner’s Operating Manual 13