Runco XP-50DHD, XP-50DHDxa, XP-65DHD, XP-65DHDxa, XP-103DHD manual Operation

4. Operation

1.Turn on your source components.

2.Press the main power switch on the PlasmaWall (see Figure 2-1, Figure 2-2or Figure 2-3). The standby/on indicator lights green.

3.Set the main power switch at the rear of the DHD Controller (see Figure 2-6)to the “on” position.

4.Press the ON button on the remote control to turn on the DHD Controller and PlasmaWall (or

press the power button on the front of the DHD Controller). The power indicator on the DHD Controller lights solid blue.

5. After a brief warm-up period (approximately 10 seconds), the PlasmaWall will display an image.

To maximize image quality when using the PlasmaWall with a personal computer, you may need to adjust the display properties of your computer’s video card. To do this on a Microsoft® Windows®-based PC:

1.Choose Settings from the Windows Start Menu and click on “Control Panel.”

4.1

Turning on the Power

4.2

Setting the Computer Display Properties

PlasmaWall XP Series Owner’s Operating Manual 33