Installation
PlasmaWall XP Series Owner’s Operating Manual 17
PRELIMINARY
3.2 Quick Setup

Table 3-1 gives a quick overview of the PlasmaWall installation process. The sections

following this one provide detailed instructions.

Installation should be performed by a qualified custom video

installation specialist.

Table 3-1. Installation Overview

Step Procedure For Details, refer to
page...
1Mount the PlasmaWall on a wall, table stand or floor ped-
estal
18
2Connect the DHD Controller to the PlasmaWall 22
3Connect signal sources to the DHD Controller 25
4Connect external controller to DHD Controller RS-232 port
(optional)
29
5Apply power to the PlasmaWall 33
6If using the PlasmaWall with a computer, adjust computer
display properties
33
7Display calibration: adjust the following for analog inputs;
save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
37
8Repeat Step 7 for digital inputs 48
Note