Runco XP-50DHD, XP-50DHDxa, XP-65DHD, XP-65DHDxa, XP-103DHD manual Using the DHD Controller Menus

Operation

Press the MENU button on either the remote control or the DHD Controller front panel to display the Main Menu. To select a menu item, use the UP ( ) and DOWN ( ) buttons on either the remote control or the DHD Controller front panel to highlight it. Press ENTER to confirm your selection.

The PlasmaWall OSD menus are arranged hierarchically, as shown in Figure 4-1.Depending on the selected input source and signal characteristics, some menu options may not be available.

When the input signal resolution is 1080i analog (via the HD1 or

Note HD2 input) or lower, the menus appear both on-screen and on the front-panel display of the DHD Controller as you navigate them:

4.3

Using the DHD Controller Menus

Input Source	↑
Aspect Ratio	↓

When the input signal resolution is 1080i digital or 1080p (via the HDMI1 or HDMI2 input), the menus appear on the front-panel display only.

PlasmaWall XP Series Owner’s Operating Manual 35