USER
INTERNAL SOURCE - AM/FM TUNER
UNO-S2 Keypad Control
UNO-S2 Keypad Control of Tuner
Selecting the tuner
On the 
to select the AM/FM tuner by choosing the tuner’s preas- signed source number (1).
Selecting the desired band
Push 
to toggle between AM band and FM band reception.
of six called banks, and there are six banks. Each preset and each bank can be given a cus- tom name of your choice.
To select a bank, press and hold 
for bank
up or 
for bank down. The bank’s name will be temporarily displayed on the
Selecting the desired frequency
Use 
and 
for manual tuning. The fre- quency will appear on the keypad and the active tuner. To move quickly through the stations,
press and hold either 
or 
for more than 1.5 seconds.
Frequency Seek
A press on 
will seek the next higher tune- able station. If a tuneable station is not found,
end the SEEK function by pressing 
again.
Frequency Scan
To scan, press and hold then release 
. The tuner scans through tuned stations with a
To end scanning, press 
again.
Selecting a Bank
The AM/FM tuner can store up to 36 favorites, or memory presets. These are stored in groups
Recalling a Memory Preset
Press 
and 
to scroll through the memo- ry presets for the selected bank. This procedure will step through all of the presets in the current bank, then loop back to start at the first one.
Only configured presets will be displayed.
Mute
Press 
to mute/unmute the tuner audio output.
16
