USER
INTERNAL SOURCE - AM/FM TUNER
SRC2 Remote Control
SRC2 Control of Tuner
Selecting the tuner
To select the tuner, push and choose the source number preassigned to the AM/FM tuner (1), or use the UNO numeric source inputs at the bottom of the SRC2.
Selecting the desired band
Push to toggle between AM/FM reception.
Frequency Scan
To scan, press and hold then release . The tuner scans through tuned stations with a
scanning, press again.
Selecting a Bank
To select a bank, press and hold for bank up
or for bank down.
Selecting the desired frequency
Use the Channel and or and
for manual tuning. To move quickly through the chan- nels, press and hold the button for more than 1.5 seconds. To directly select a station, enter the three- or
Frequency Seek
The SEEK function is performed by pressing and
releasing the Select or or . To seek
higher frequency station press . Press for lower frequencies. Tuning begins at the current fre- quency, seeks upward (or downward) and stops at the
next tuned station. Pushing or again con- tinues the SEEK function. Once the highest frequency is reached, the tuner continues SEEK mode at the lowest frequency.
Bank/Memory Presets
The AM/FM tuner has six banks of preset memory settings, and each bank holds six presets for a total of 36 possible presets.
Memory Preset Programming
1. Select a bank - press and hold or
until the desired bank #
with | , | , | or | . |
|
3.Press and hold a # button
Recalling a Memory Preset
Press and to scroll through a loop dis-
play of all the configured memory presets for the cur- rently selected bank.
Mute
Press the button to mute/unmute the tuner audio output.
18