Russound CAM6.6T-S1 instruction manual UNO-S1 Keypad-UpdatePort, Installer, Component Guide

INSTALLER

COMPONENT GUIDE

UNO-S1 Keypad-Update Port

Src 3

1

3

2

Data Rx TTL Level

Data Tx TTL Level

GND

+12VDC

Note: Do not put RS-232-level signals into the pins. Must use Advanced Programming Cable P/N 2500-521065.

1OS Update/Run Jumper -The pins are jumpered when performing an OS update on the key- pad, and removed during normal operation.

(Typically needed only on a keypad that has never been updated)

2Setup Button - Activates information and update menus for the keypad.

3OS Update Port - Used to update the UNO-S1 keypad operating system firmware. If an update is released, it will be available online through the Document Center on www.russound.com. Look for it in the “Firmware and Downloads” section under Multi-Zone product type. The Advanced Programming Cable is available from Russound, Part #2500- 521065.

26