INSTALLER
INSTALLATION MENU
9. KEY FUNCTION (f) – | Select Keypad function. |
(KeyFn) |
|
10.SAVE CHANGES? (f) – Select “yes” to save the changes. (Save?)
LEARN IR (LrnIR)
This procedure allows IR commands to be learned into the system and be centrally stored in the main controller to let the system access the same IR codes that operate the source equipment.
NOTE: IR codes must be learned in by pointing the remote at the CAM6.6’s REAR panel IR receiver only. See Learn IR - Flow Chart on page 73
1. LEARNED SRC – (LnSrc)
2. KEY FUNCTION – (KeyFn)
3. LEARN/DELETE – (Ln/Dl)
4. TEST IR? – (TstIR)
5. SUCCESS? - (OK?)
MACRO EDITOR (MacEd)
This procedure is used to create a sequence of commands that are launched with one key touch or other event. Up to 132 macros can be created for the system, and each macro can contain up to 10 commands including other macros and delays. See Macro Editor - Flow Chart on page 74
60