INSTALLER
INSTALLATION MENU
1.SOURCE NUM – (Src #)
2.USE NUM IR? – (NumIR)
3.HIGHEST NUM – (High#)
4.NUMERIC TEXT – (NmTxt)
5.PREFIX CMD – (Prefx)
6.COMMAND TYPE – (CmdTp)
a.Selected: Learned IR (LrnIR)
i.LEARNED SRC – (LnSrc)
b.Selected: Unassigned (Unasg)
c.Selected: Default (Deflt)
d.Selected: Macro: (Macro)
i.MACRO - (Macro)
ii.MACRO ID – (MacID)
e.All Other Selections:
7.DEVICE CODE – (DevCd)
8.KEY FUNCTION – (KeyFn)
Select the source number this function will be configured for.
Tells the system whether the source component has numeric scrolling, such as
Enter the highest possible number; for example, the
Select Numeric descriptive text.
Tells the system whether a command will be issued prior to the selection of the numerical value (e.g., Disc 1,2). If “no,” proce- dure advances to SUFFIX CMD (step 9)
Select the type of command (e.g., CD, TV, etc.).
Choose Learned IR if the
Select the learned source bank to be assigned to the source component. Procedure advances to KEY FUNCTION (step 8)
The numeric IR Prefix command is cleared. Procedure advances to SUFFIX CMD (step 9)
Default selects the same device type and device code previously setup in BASIC SETUP. Procedure advances to KEY FUNCTION (step 8)
(To build macros, see Macro Editor page 61)
Macro loads a series of commands which are processed when activated.
Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)
Procedure advances to DEVICE CODE (step 7)
Source component code for IR control.
Select a function (Disc, etc.).
54