RUSSOUND SELECTION - “R” must be the selected source for control of the CAM6.6 and any connected compo- nents. Select “R” before sending SRC2 remote commands.
1
2
11
| 3 |
10 |
|
| 4 |
| 3 |
9 | 5 |
| 6 |
7
8
USER
INTERNAL SOURCE - AM/FM TUNER
SRC2 Remote Control
1POWER - Power managed by CAM6.6
2NUMERIC INPUT - (press) Number buttons for direct input of frequency
2MEMORY PRESETS - (press and hold) Number buttons
3TUNE UP/DOWN - Incrementally scrolls through channels or tuned stations
4OK - Confirms numeric selection
5PLAY - Selects AM or FM band
6SCAN - (press and hold) Scans through tuned sta- tions with
6SEEK UP/DOWN - (press) Seeks next tuned station up or down
7MEM UP/DOWN - (press) Scrolls through memory presets for selected bank
7BANK UP/DOWN - (press and hold) Used for bank selection
8TUNER SELECTION - Select AM/FM Tuner by its assigned source number
9PAUSE - Mutes/unmutes tuner audio output
10SEEK UP/DOWN - Seeks next tuned station up or down
11TUNE UP/DOWN - Incrementally scrolls through tuned stations
19