INSTALLER
SYSTEM PROGRAMMING OVERVIEW
3. Basic Setup (SOURCE SETUP) (Pages 50-52)
This procedure is mandatory to set up each source for keypad source control and is the cornerstone of the programming process.
4. Peripheral Setup (Pages
This procedure provides setup and naming procedures for the tuner. It includes assigning a custom name to a memory preset or bank, and choosing a region for AM/FM operation (US or Euro).
5. Learn IR (Page 60)
This procedure is used when the
6. Macro Editor (Pages
This procedure compiles multiple IR keycodes to be initiated by a single button press. One macro can have up to 10 commands, including other macros, and up to 132 macros can be entered.
7. Source Volume Trim (SOURCE SETUP) (Page 53)
This procedure matches audio output signals for all sources for seamless switching.
8. Numeric IR (SOURCE SETUP) (Pages
This procedure sets up control of a source that supports direct numeric commands.
9. Key Configuration (SOURCE SETUP) (Pages
This procedure customizes individual key functions on a
10. Power Management (Pages
This function incorporates IR macro commands to automatically control the power state of the sources when the system is in use or when a home theater is sharing sources.
11. Zone Volume Trim (ZONE SETUP) (Page 57)
This procedure limits the maximum volume allowed in a zone, regardless of keypad volume adjust- ment.
12.System On Enable (SYSON ENABLE/ZONE SETUP) (Page 57) This feature allows a zone to join or opt out of an “all on” command.
13.Party Enable (ZONE SETUP) (Page 57)
This feature allows a zone to join or opt out of Party Mode participation.
14. Master Enable (ZONE SETUP) (Page 57)
This feature allows a zone the option of becoming a Master keypad in Party Mode.
15.Mute Enable (ZONE SETUP) (Page 57) This feature allows a zone to allow or mute audio.
43