Russound CAM6.6T-S1 instruction manual 12VDC Mute Trigger In/Out, Installer, Making Connections

12VDC Mute Trigger In

When 12VDC is applied to the Mute Trigger In, the system will fully mute any source that is con- nected to the Source Audio Input. The connec- tions for the trigger are made using a two-con- ductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is negative (-). This allows for the connection of an external paging or muting device. The CAM6.6 can be pro- grammed to mute audio for one or all zones as preferred when the 12VDC is applied.

INSTALLER

MAKING CONNECTIONS

12VDC Mute Trigger In/Out

12VDC Mute Trigger Out

Mute Trigger Out 12VDC output is used for trig- gering an external amplifier, muting device or other paging component dependent on the Mute Trigger In 12VDC. The connections for the out- put are made using a two-conductor cable with 1/8” male mini-plug jacks at each end. The tip is positive (+) and sleeve is negative (-). The default setting for the Mute Trigger Out provides 12VDC whenever 12VDC is applied to the Mute Trigger In.

CAM6.6

Doorbell Interface

35