Russound CAM6.6T-S1 instruction manual Multiple Controllers With Two Tuners, Sample Configurations

SAMPLE CONFIGURATIONS

MULTIPLE CONTROLLERS WITH TWO TUNERS

System with two CAM6.6T (internal tuner) controllers

The configuration below is suitable for 7 to 12 zones that will have access to the tuner in the controller to which its keypad is connected only. Built-in tuners are always Source 1 and cannot be changed. If you have more than one internal tuner, you must set each tuner to its specific Controller ID number. If you want each controller to have access to dual tuners, a suggested solution is to use an ST2 Dual Tuner with two CAM6.6s (see next page).

CAM6.6T (1) -

Controller Setup Menu: Controller ID = 1

Peripheral Setup Menu: Controller ID = 1

CAM6.6T (2) -

Controller Setup Menu: Controller ID = 2

Peripheral Setup Menu: Controller ID = 2

A CAT-5 patch cable is use to connect the RNET Link Out of Controller 1 to the RNET Link In of Controller 2.

102.5 102.5 102.5

UNO-S1

CAM6.6

CAM6.6 Back Panel (Controller ID 1)

92.5 92.5 92.5

UNO-S1

CAM6.6

CAM6.6 Back Panel (Controller ID 2)

104