| INSTALLER |
| INSTALLATION MENU |
2. SOURCE NAME – | Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.). |
(Name) |
|
3. COMMAND TYPE – | Select the type of command template (e.g., CD, TV, etc.). Selecting |
(CmdTp) | the command type template will tell the CAM 6.6 how to configure the |
| key’s command and text for the source component. |
a. Selected: Learned IR | Choose Learned IR if the |
(LrnIR) | not support the source component. |
i. LEARNED SRC – | Select the learned source bank to be assigned to the source |
(LnSrc) | component. (See Learning IR procedure for instructions on how |
| to learn IR codes.) |
ii.TEMPLATE TYP – Select the template type to define what type of source compo-
(TType) | nent is being used. (This will tell the CAM6.6 how to configure |
| the key commands and text for the source component if it is a |
| learned source.) Procedure advances to USE NUM IR? (step 7). |
b. Selected: Unassigned | The template for the selected source is cleared. (All key |
(Unasg) | assignments and other source settings will be erased.) |
| Procedure advances to SAVE CHANGES (step 10) |
c. All Other Selections: | Procedure advances to DEVICE CODE (step 4) |
4. DEVICE CODE – | Enter source component code number listed in this manual’s |
(DevCd) | Reference section. |
5. TEST IR? – | If “Yes” is selected, the CAM6.6 sends a power command to the |
(TstIR) | source component. If “No” is selected, the procedure advances |
| to USE NUM IR? (step 7) |
6. SUCCESS? – | If the power to the source component was turned off, select |
(OK?) | “Yes” otherwise select “No.” By selecting “No” the Procedure |
| returns to DEVICE CODE (step 4) to allow selection of another |
| code number from the provided list. |
7.USE NUM IR? – (NumIR)
Indicates the source component has numeric scrolling, such as
8. HIGHEST NUM – | Enter the highest possible number; for example, a |
(High#) | player would have a max number of 100. |
51
