| INSTALLER |
| INSTALLATION MENU |
9. SUFFIX CMD – | Tells the system whether a command will be issued after the |
(Sufix) | selection of the numerical value (e.g., 1, 2 Enter). If “no,” proce- |
| dure advances to SAVE CHANGES (step 13) |
10. COMMAND TYPE – | Select the type of source command (e.g., CD, TV, etc.). |
(CmdTp) |
|
a. Selected: Learned IR | Choose Learned IR if the |
(LrnIR) | not support the source component. |
i. LEARNED SRC – | Select the learned source bank to be assigned to the source |
(LnSrc) | component. Procedure advances to KEY FUNCTION (step 12) |
b. Selected: Unassigned | The numeric IR Suffix command is cleared. Procedure advances |
(Unasg) | to SOURCE NUM (step 1) |
c. Selected: Default | Default selects the same device type and device code previously |
(Deflt) | setup in BASIC SETUP. Procedure advances to KEY FUNCTION |
| (step 12) |
d. Selected: Macro: | (To build macros, see Macro Editor page 61) |
(Macro) |
|
i. MACRO - | Macro loads a series of commands which are processed when |
(Macro) | activated. |
ii. MACRO ID – | Enter the macro ID number. Menu advances to SAVE CHANGES |
(MacID) | (step 13) |
e. All Other Selections: | Procedure advances to DEVICE CODE (step 11) |
11. DEVICE CODE – | Source component code for IR control. |
(DevCd) |
|
12. KEY FUNCTION – | Select a function (Enter, Play, etc.). |
(KeyFn) |
|
13. SAVE CHANGES? – | Select “yes” to save the changes. |
(Save?) |
|
SRC SEL CMD (SrcSC)
This procedure permits a command to be sent to the source component when the source component is initially selected. See Source Select Command & # Of Sources - Flow Chart on page 69
1. SOURCE NUM – | Select the source number this command will be configured for. |
(Src #) |
|
55
