Loading Paper
For best results, use high quality 75g/m2 (20 lb) xerographic paper.
Note: For more information on loading paper and other print material, refer to ÔLoading Print MaterialÕ on page 19.
1. Pull the extender on the automatic paper feeder up, until it stops.
2.Before loading the paper, flex the sheets back and forth to loosen them, then fan them. Tap the edges on a table top to straighten them. Doing this before you load paper helps prevent paper jams.
DonÕt load too much. This feeder holds up to 150 sheets.
3.Insert the paper in the paper feeder.
If the paper has a preferred print side, place the print side facing you. If you use letterhead paper, load the paper with the
6Setting Up Your Printer
