FONT SETUP
Typeface
Allows you to select the desired typeface. This setting is ignored when
the software application specifies a font.
Symbol Set
Determines the symbol set. Asymbol set is a set of alphabetic and
numeric characters, punctuation, and special symbols used when
printing with a selected font.
Pitch
If you chose a scalable monospaced font, you can select the font pitch.
Pitch refers to the number of fixed-space characters in a horizontal
inch of type.
Point Size
If you chose a scalable typographic font, you can select the point size
for the font. Point size refers to the height of the characters in the font.
One point equals approximately 1/72 of an inch. You can select point
sizes from 4 to 999.75 in increments of 0.25 points.
Font List
Prints the font list showing all the fonts available for PCLemulation.
QUALITY
Density
Determines the overall density of the printed image.
SMET
SMET(Samsung Memory Enhancemant Technology) mode makes
the printer process more data by optimizing the memory. With this
mode set to ON,the complex data can be processed.
SRT
Use the printerÕs SRT(Samsung Resolution enhancement Technology)
setting to produce print with smooth angles, curves and edges.
ENHANCE : Better Text Image
GRAY: Better Photo Image
GRAY+ : Better Photo Image & Text Image
You can get 1200 dpi grade printouts by using SRT mode.
ABOUT
This tab shows the software version and copyright information.
37
Operating Your Printer
03-Troubleshooting 5/10/99 4:04 PM Page 11