Samsung C01 Using SiPTel IP Phone, Connecting IP phone to Internet Using in Dial-up Mode

SiPTel C01 IP Phone User Manual

5. Using SiPTel IP Phone

5.1.Connecting IP phone to Internet

5.1.1.Using in Dial-up Mode

STEP 1	Press @ISP button on the key pad of SiPTel IP Phone. The built-in modem will try to
	connect to the dial-up ISP preset in Modem setup.
	If you want to cancel to connect to an ISP, please press ‘@isp’
[Dial-UP]	button again.
Connecting
Wait a moment

STEP 2 If you can see ‘ATDT + dial-up ISP Tel number’ on the LCD, it means that the modem is trying to call your local ISP telephone number.

ATDT specified the dialtype as TONE and

OKATDP specifies the dialtype as PULSE.

ATDT 172233

XXXXX

STEP 3 If you can see ‘PPP Start’ message on the LCD, it means that the connection to the dial- up ISP is succeeded.

If you can’t see the left display, please try again.

XXXXXXXX

Connect 34667

PPP Start

STEP 4 If you can see the following display, it means that the connection is successful, and SiPTel IP Phone has obtained a Dynamic IP address from the dial-up ISP.

If you can’t see the left display, please try again.

IP: XXX.XXX.XXX.XXX

Connection OK