Samsung CLX-3305FW manual Operation Mode Select ad hoc

Wireless network setup

4Read and check The software End User License Agreement and Using

Enhanced Features and Participating in Printer Usage Information Collection Program (optional). Then, click Next.

5Select Configure the wireless network connection using USB cable on the Printer Connection Type screen. Then, click Next.

6After searching the wireless networks, a list of wireless networks your machine has searched appears. Click Advanced Setting.

• Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive).

•Operation Mode: Select ad hoc.

•Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).

•Authentication: Select an authentication type.

Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.

Shared Key: Authentication is used. A device that has a proper WEP key can access the network.

•Encryption: Select the encryption (None, WEP64, WEP128).

•Network Password: Enter the encryption network password value.

•Confirm Network Password: Confirm the encryption network password value.

•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.

The wireless network security window appears when the ad hoc network has security enabled.

Select Open System or Shared Key for the authentication and click Next.

•WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key.

7The window showing the wireless network setting appears. Check the settings and click Next.

2. Using a Network-Connected Machine 173