Samsung CLX-3305FW manual 153

2. Using a Network-Connected Machine

IPv4 configuration using SetIP (Mac)

Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall.

The following instructions may vary from your model.

1 Connect your machine to the network with a network cable.

2 Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.

3 Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPapplet.html page that shows the printer’s name and IP address information.

4 Click the icon (third from left) in the SetIP window to open the TCP/ IP configuration window.

5 Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding.

Wired network setup

7Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information

assigned by a network manager before proceeding.

Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 152) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.

8Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are

correct.

153