Samsung DVD-V77MS VCR Auto Power Off Selecting the Cassette Type, Auto Repeat Play

00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 26

VCR Auto Power Off

Selecting the Cassette Type VCR

GB

Australia Model

			USER SET
	COLOUR SYSTEM		:AUTO
	IPC		:ON
	AUTO POWER OFF		:OFF
	G-CODE EXTEND		:OFF
	RETURN	"❷!!➛!❿
Newzealand Model
			USER SET
	COLOUR SYSTEM		:AUTO
	NICAM		:ON
	IPC		:ON
	AUTO POWER OFF		:OFF
	G-CODE EXTEND		:OFF

The Auto Power Off feature automatically turns off your DVD-VCR if no signal is received and you do not press any button for the selected time.

1Press SETUP on the remote control. Result: The MAIN MENU is displayed.

2Press the corresponding ",❷ buttons to select the Option.

3Press the ENTER button to select this option. Result: The USER SET menu is displayed.

4Press the corresponding " or ❷ buttons, until the AUTO POWER OFF option is selected.

5Press the ❿ button, until you select the time of Auto Power off interval.

OFF 2HOUR 3HOUR

6On completion, press RETURN to exit the menu.

If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

1Press SETUP on the remote control. Result: The MAIN MENU is displayed.

2Press the corresponding ",❷ buttons to select the VCR Setup option.

3Press the ENTER button to select this option.

4Press the corresponding ",❷ buttons to select the

Tape Select menu.

5Press the ➛ or ❿ buttons as many times as required, until the correct cassette length is displayed.

E180 E240

E300 E260

6Press RETURN to exit the menu.

GB

Enter

		Return
DVD Setup
VCR Setup	Clock Set
Language	Installation
Parental	Tape Select	E180
	Repeat play	OFF
Option	OSD	ON
Program

RETURN"❷!!➛!❿

VCR G-CODE EXTEND

Auto Repeat Play VCR

Australia Model

			USER SET
	COLOUR SYSTEM		:AUTO
	IPC		:ON	OFF
	AUTO POWER OFF		:OFF
				10
	G-CODE EXTEND		:OFF	60
	RETURN	➛!❿!!!"❷
Newzealand Model
			USER SET
	COLOUR SYSTEM		:AUTO
	NICAM		:ON
	IPC		:ON	OFF
	AUTO POWER OFF		:OFF	10
	G-CODE EXTEND		:OFF
				60
	RETURN	➛!❿!!!"❷

To prevent delays or over-runs the DVD-VCR has a function called G-CODE EXTEND allowing you to extend the recording time by up to 60 minutes.

1Press the SETUP button on the remote control.

2Press the corresponding ",❷ buttons to select the Option.

3Press the ENTER button to select this option. Result: The USER SET menu is displayed.

4Press the corresponding "or ❷ buttons, until the G-CODE EXTEND option is selected.

5Press ➛ or ❿ buttons to set the G-CODE EXTEND time by increments of 10 minutes.

6To turn off, press ➛ or ❿ buttons repeatedly until OFF shows.

You can set repeat play to repeat the tape continuously from beginning to end.

1Press SETUP on the remote control. Result: The MAIN MENU is displayed.

2Press the corresponding ",❷ buttons to select the VCR Setup option.

3Press the ENTER button to select this option.

4Press the corresponding ",❷ buttons to select the

Repeat Play menu.

5	To...	Press ➛ or ❿, until...
	Repeat play		ON is displayed.
	Do not wish to repeat play		OFF is displayed.

6On completion, press RETURN to exit the menu.

Enter

		Return
DVD Setup
VCR Setup	Clock Set
Language	Installation
Parental	Tape Select	E180
	Repeat play	OFF
Option	OSD	ON
Program

26 27