Samsung DVD-V77MS Connecting DVD-VCR to the TV using the RCA Cable, Connector Location Type

00115A DVD-V77MS-GB1 10/25/02 10:43 AM Page 10

Deciding How to Connect DVD-VCR

Connecting DVD-VCR to the TV using the Coaxial Cable

GB

You must take into account various factors when connecting audio or video systems:

◆Types of connectors available on your systems

◆Systems connected permanently to the DVD-VCR (satellite receiver for example) or temporarily (camcorder for example)

Your DVD-VCR is equipped with the following connectors.

Connector	Location	Type	Direction	Recommended Use
LINE	Rear	Audio/Video RCA	In/Out	◆ Television
				◆	Other VCR
Audio output	Rear	Audio RCA	Out	◆	Audio out (DVD only)

To receive television programmes a signal must be received from one of the following sources:

◆An outdoor aerial

◆An indoor aerial

◆A cable television network

◆A satellite receiver

☛Make sure that both the television and the DVD-VCR are switched off before connecting the cables.

1Remove the aerial or network input cable from the television.

2Connect this cable to the 75Ω coaxial socket marked on the rear of your DVD-VCR.

3	Plug the coaxial cable supplied into the	TV	socket on your
	DVD-VCR.

4Plug the other end of the coaxial cable into the connector previously used for the aerial on the television.

5To obtain better quality pictures and sound on your television, you can also connect your DVD-VCR to the television via the RCA cable (see section below) if your television is equipped with this type of connection.

GB

DVD & VCR

2

TV	DVD & VCR
	4
	3

COMPONENT	Rear	RCA	Out	◆ COMPONENT out (DVD only)
output
S-VIDEO	Rear	S-JACK	Out	◆ S-Video out (DVD only)
output
Digital AUDIO	Rear	Optical	Out	◆ Digital Audio out (DVD only)
output		coaxial
OUT TO TV	Rear	75 Ω	Out	◆ Television
		coaxial
IN FROM ANT. Rear		75 Ω	In	◆ Aerial
		coaxial		◆ Cable television network
				◆ Satellite receiver

☛Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements are switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

Connecting DVD-VCR to the TV using the RCA Cable

Aerial

TV

DVD & VCR

3

2

RF coaxial cable

You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on the television. You thus:

◆Obtain better quality sound and pictures

◆Simplify the setting up procedure of your DVD-VCR

☛◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆Make sure that both the television and the DVD-VCR are switched off before connecting the cables.

1Connect the coaxial cable as indicated in the above section.

2Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of the DVD-VCR.

3Plug the other end into the appropriate connector on the television.

10 11