
00115A
VCR
Picture Search, Fast Forward/Rewind
Using the Tape Counter | VCR |
|
|
GB
Picture Search enables you to Fast Forward or Rewind and look for a particular part of a tape.
1 | Press PLAY, the VCR will enter normal play mode. While in play, |
| press and release the ❿❿ (or ➛➛) button. The VCR will search at 5 |
| times the normal playback speed. |
|
|
2 | To return to normal playback mode, press the ❿II button. |
3 | If you press and HOLD down the ❿❿ (or ➛➛) button the VCR will |
| search at 9 times the normal speed. Releasing the ❿❿ button will |
| return the VCR to search at 5 times the normal speed. To return to |
| normal playback mode, press the ❿II button. |
|
|
4 | Whilst in Picture Search mode, if you press the ❿❿ button again, |
| the VCR will enter normal Fast Forward mode. |
The tape counter:
◆Indicates the elapsed time in the play and record modes (hours, minutes and seconds)
◆Is reset when a cassette is inserted in the
◆Allows you to find the beginning of a sequence easily
☛If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
GB
0:00:00
VCR
5 | Likewise, whilst in Picture Search ➛➛ mode, if you press the ➛➛ |
| button again, the VCR will enter normal Rewind mode. |
6 | If, when Rewinding (➛➛) or Fast Forwarding (❿❿), you press the ➛➛ |
| (or ❿❿) button, the VCR will enter the Picture Search mode. |
|
|
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts.
The Search function allows you to
|
|
| ➞ |
|
| |
|
|
|
|
|
|
|
| Prev |
| Seq. being |
| Next |
|
etc. | Seq. |
| played |
| Seq. | etc. |
|
|
|
|
|
|
|
2 | 1 | 1 | 2 |
➢This VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.
INTRO SCAN
1To search for a specific index, press INDEX.
2Press the ➛➛ or ❿❿ buttons depending on the direction where your desired programme is located.
3When an Index mark is found the VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
4If you want to watch the tape from a particular Index, simply press ❿II.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the INDEX button.
1 Press the INDEX to start the Index search.
2 Press the ➛➛ or ❿❿ buttons twice more. This will take
you directly to the start of the desired programme is located.
3 These Index searches can be made forwards: (press ❿❿) or backwards: (press ➛➛).
4 To cancel an Index search simply press the ❿II or ■ button.
1Insert a cassette in your
2To set the tape counter to zero at the beginning of a sequence:
◆Press DISPLAY twice to display the counter
◆Press CLEAR when you want to set the tape counter to zero
3When you are ready,
◆Start playback or Recording.
◆Press the ■ button.
◆To
➢Some
Press DISPLAY:
◆Once to display the current function, programme number, recording speed, date, time and counter
◆Twice to display the counter only
◆Three times to display the time remaining on the cassette
◆Four times to clear the display
2
2
38 | 39 |