Setup menu
INFORMATION
● When this menu is selected without inserting a memory card, you can select |
the [Copy To Card] menu but the menu can’t be run. |
● If there is not enough space available in the memory card to copy saved |
images in the internal memory (19MB), the [Copy To Card] command will |
only copy some of the images and then display a [Memory Full!] message. |
Then the system will return to the playback mode. Please be sure to delete |
[ Selecting Video out type ]
■The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
any unnecessary files to free up space before inserting the memory card |
into the camera. |
● When you move the images that are stored in the internal memory to the |
memory card, the next number of file names will be created in the card to |
avoid duplication of the file name. |
- When the [Reset] of the [File] setup menu is set : The copied file names |
start from after the last stored file name. |
- When the [Series] of the [File] setup menu is set : The copied file names |
start from after the last captured file name. After completing [Copy To |
Card], the last stored image of the last copied folder is displayed on the |
LCD monitor. |
■Connecting to an external monitor
In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the AV cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.
NTSC |
| Format |
|
| |
PAL |
| Delete All |
|
|
|
|
| Copy to Card |
|
|
|
| ◀ | Video Out |
|
|
|
|
| Reset |
Exit:BACK
Yellow - Video White - sound
《57》
