
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1Unplug the cable or antenna from the back of the TV.
2Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT 1 IN(AIR) or ANT 2 IN (CABLE) terminal on the TV.
4Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.
5Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1
➢If you have a “mono”
| TV Rear Panel |
VCR Rear Panel |
|
5 | Audio Cable(Not supplied) |
2 |
|
4 | Video Cable(Not supplied) |
3 | Antenna cable(Not supplied) |
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
Your Samsung TV can be connected to the
(This connection delivers a better picture when compared to the regular Video connection above.)
1To begin, follow steps
2Connect an
3Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1
TV Rear Panel
VCR Rear Panel
3 Audio Cable (Not supplied)
2
3 Antenna cable(Not supplied)
An
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
English - 11